TECNODIMENSIONE PROFESSIONAL SENSORIZED STOP/GO DISPLAYS
With 2 screw-on terminal boxes for conventional wiring. This is the stop and go display (instead of the manual pressure button) with an infrared sensor that “sees” a presence up to 10 cm away. The “contactless” door-opening command and/or bell works automatically by bringing the hand close without touching anything. As exactly dimensioned like all other devices in the “Slim&Modular”line to be interchangeable and freely housed in the same frame cuts and settings...they are MODULAR and CONVERTIBLE into 5 different types of installation beside the door.
1 - Fully aligned concealed for recess-mounting without flange on the same plane of the door frame panel. In this case it is advisable to prepare the recess during the door frame machining.
2 - Fully aligned at milling for recess-mountingwith front flange on the same plane of the panel surface. In this case, it is advisable to prepare sunk milling during the panel machining phase.
3 - For conventional flush mounting with front flange overlapping door frame. Mounting can be carried out “on site”, directly onto the installed door frame.
4 - For surface mounting with using housing. Useful when you wish to avoid recess-mounting or cuts on the door frame.
5 - For recessed wall-mounting with flange and wall-mounting receptacle. Wall niche and cable channel to be prepared beforehand.
Download slim-dualux-no-touch-stop-go-displays-sic
